5 Reasons Why Your Air Conditioner is Not Cooling

Have you ever come across a frustrating situation on hot summer days in case your air conditioner stops cooling?  

Well, most of you might have faced such an issue in your homes or workplaces. 

No doubt, this is the worst experience when you sweat even while sitting in front of the air conditioner. In such a situation the first thought that clicks in your mind is to fix the problem. But, how can you fix the problem without knowing the cause of the defect? 

Therefore, first, you should recognize the fault why your air conditioner is not cooling. Don't fret about finding the reasons as this article provides you with the reasons why an AC is not cooling. 

So, let's don't waste your time and dive into the article. 

Faults your AC Might be Facing in Case of not Cooling

The following are some reasons why your AC might not be working properly;

1- Leakage of Refrigerant 

The refrigerant of your AC plays a vital role in providing cooling as it absorbs heat from the surrounding air and moves it outside. The refrigerant may undergo two faults if cooling is not produced. 

The first and the most common possibility might be some leakage of refrigerant. If the time period of leakage extends for a longer time it may damage the compressor and the system shutdowns completely. 

Secondly, the refrigerant level of the air conditioner might be lowered. In case you observe any of the defects, fixing them will surely solve the problem. 

2- Air Filter might be Dirty

The air filter of an air conditioner functions in catching the dust, hairs,  and other airborne particles in order to prevent the inner components of the system from dirt. When filters get clogged due to excessive dirt, the airflow may be reduced or completely blocked. 

To check whether the air filter is clean or not, simply turn off the AC and remove the filter. If it is dirty, clean it thoroughly. Usually, it is recommended to change them after three months. 

3- Faulty Compressor

The compressor is the main component of your air conditioning system. It circulates the refrigerant between the indoor and the outdoor units of the air conditioner. 

In case your air conditioning system possesses a faulty compressor it wouldn't be possible to absorb heat from the room and transfer it outside. Thus resulting in poor cooling or hot air. 

However, if it gets damaged you need to be ready for an expensive replacement. Moreover, you may contact air conditioning dealer Glenmore Park for a better solution.   

4- Incorrect Thermostat Settings

Make sure whenever you turn on your AC, you check the thermostat settings. Mostly, the settings are disturbed due to which your air handler blows warm air. 

Below are some suggestions for you;

Ensure that your system is set to cool mode instead of heat or warm.

Check the temperature settings whether that's suitable or not.

Keep your AC's thermostat setting on auto mode instead of on mode.

If the issue gets resolved by following the above-mentioned tips well, otherwise go for other troubleshooting tips. 

5- Blocked Condenser Unit

The condenser unit is located outside the room. If it is clogged by some debris or dust it would not be possible to release the heat from the condenser coils. 

Therefore, if the heat doesn't get out fully it would not be possible for the system to provide enough cooling. 

In the end, if you want to get rid of the non-cooling problem of your AC, detect the issue and then fix it. If it's not possible for you to fix the problem, then you're free to head towards air conditioning dealer Glenmore Park for quick fixing. 

Disclaimer: This is a generic Information & post; content about the services can be changed from time to time as per your requirements and contract. To get the latest and updated information, contact us today or visit our website.